Wired Communication Modules


Wired IoT Module MOD958                              Powerline Communication Module (PLC Module) MOD923

Xingtera offers a complete portfolio of wired communication modules, wired connectivity modules, wired IoT modules, G.hn modules, power-line communication modules (PLC modules), Ethernet over coax modules (EoC modules), and Ethernet over twisted pair modules. The PHY rate ranges from 1Mbps up to 2Gbps, and the system supports up to 1,000 nodes in a single mesh network.

Please refer to the following table for a brief introduction to our modules. 

  Max PHY Rate Max Num Nodes Dimension Interface Application Examples
MOD901 1Mbps 1,000 32x33mm Serial/SPI/I2C/GPIO/AD Sensor network, solar panel
MOD927 100Mbps 1,000 25x65mm Ethernet/Serial/GPIO Smart grid, building automation
MOD930 100Mbps 1,000 32x32mm Ethernet/Serial/GPIO Industrial IoT and connectivity 
MOD920 200Mbps 16 38x38mm Ethernet/GPIO Surveillance camera (embedded)
MOD923 200Mbps 16 25x65mm Ethernet/Serial/GPIO Ethernet over coax / twisted pair
MOD957 1,000Mbps 8 25x45mm Ethernet High-speed home network
MOD958 2,000Mbps 8 25x45mm Ethernet High-speed Internet access

For ultra high performance power-line communication (PLC) or Ethernet over coax/twisted-pair (EoC/EoTP) applications, the G.hn series modules MOD957 and MOD958 are recommended. Both modules are fully ITU-T G.hn standards compliant, and support mesh topology with plug and play functions. The maximum PHY rate is 2Gbps, and the maximum throughput exceeds 1.7Gbps. Therefore these modules can enable ultra high speed applications such as 4K video streaming, virtual reality, home networking, or access networking.

For high performance Ethernet over coax/twisted-pair (EoC/EoTP) applications, especially security surveillance camera networking requirements, MOD920 and MOD923 are recommended. These modules support up to 240Mbps PHY rate, and up to 100Mbps uni-directional throughput. MOD923 has been applied in IP camera upgraded projects worldwide, while MOD920 (38x38mm) can be easily integrated into surveillance cameras so that IP cameras can be directly connected using existing coax cables.

For power-line communication (PLC) applications involving hundreds of nodes, MOD927, MOD930, and MOD901 are recommended. Both MOD927 and MOD930 has a maximum PHY rate of 40Mbps, and support aggregate data rate in the range of 10Mbps. They can be deployed for large scale IP-based mesh networks based only on existing wires including DC or AC power-line, serial cables, or twisted pair. Applications such as building automation networks, or mining voice communication networks, can all benefit from these modules by reusing existing power-line or other cables. Meanwhile, MDO901 provides an alternative when IP or Ethernet is not required. MOD901 provides a rich set of interfaces and it enables UART, SPI, I2C, or other low-speed control data over power-line. This is ideal for applications such as solar panel control networks, or sensor and controller mesh networks. 

We are also able to customize wired IoT connectivity modules or power-line communication (PLC) modules according to your requirements. For further information, please contact us